dulux_simply_refresh_kitchen_cabinets_global_1

Grey kitchen cabinets

How to paint kitchen cabinets with Simply Refresh

Follow these simple steps to transform your kitchen cabinets and give them an impressive new look

Looking for an exciting makeover or saving up for a new kitchen? Simply Refresh gives you a budget-friendly way to transform your kitchen cabinets. The paint is also hardwearing and easy-to-clean, so their new look will last.

You’ll need:

Simply Refresh for kitchen
Dust sheet
Screw driver
Masking tape
Degreaser
Cloth
Sand paper and sanding block
Paint stirrer
Paint tray
Brush
Roller

Prepare

dulux_simply_refresh_kitchen_cabinets_global_2

Wiping kitchen cabinets

Put down dust sheets to protect your flooring, worktops and any furniture nearby that you can’t move. Remove any doorknobs and handles, and protect hinges with masking tape. Give your kitchen cabinets a thorough clean with degreaser and wait for them to dry.
Gently sand your cabinets with fine sand paper to create a smooth painting surface. For large flat areas, using a sanding block will help give a consistent finish.
Mask up any areas where the cabinets meet walls, flooring, skirting, appliances or worktops.

Paint

dulux_simply_refresh_kitchen_cabinets_global_3

Painting kitchen cabinets

When you’re using Simply Refresh, there’s no need to apply primer to your surfaces: you can go straight in with your top coats, saving you time and money.

Give your paint a good stir, pour it into the paint tray and you’re ready to get started. First, cut in around the edges using a brush.
Then, use a roller to paint larger surfaces and then allow the paint to dry for the time recommended on the back of your tin before applying the second coat. When applying your second coat, try to roll in the opposite direction of your first coat to help achieve a consistent finish.

Top tip: In between coats, simply put your brush and roller in a plastic bag to keep them moist and you’ll be able to use them again for your next coat without having to wash them.
Let your doors dry thoroughly before opening and closing them. If you are also painting the insides of your cabinets, it’s usually best to do one side at a time.

Clean

Once your second coat is completely dry, you can remove the masking tape and put your doorknobs and handles back on to your beautiful cabinets.
Remove as much paint as you can from your brush, roller and tray and give them a thorough wash in water. There’s no need to use white spirit, as Simply Refresh is water based.
Firmly close your paint tin and store it in a dry and frost-free environment.